Navigation path
Data files
These files are designed to be used with the Breedcow and Dynama software. If you do not already have Breedcow and Dynama software installed, go back and download Breedcow and Dynama, then come back.
These files are example data files for Bcowplus, AECalc, Prices and Huscosts programs, covering Queensland, NT and the northern part of WA. They provide a starting point when looking at herd performance, and a base against which to measure the impact of husbandry and other herd management changes.
- Price:
- Free downloadable software
- System requirements:
- Requires an installed copy of Breedcow and Dynama software
Disclaimer
While every care has been taken in preparing this publication of DEEDI materials, the State of Queensland accepts no responsibility for decisions or actions taken as a result of any data, information, statement or advice, expressed or implied, contained in it.
DEEDI does not warrant, guarantee or make any representations regarding the correctness, accuracy, reliability, currency, or any other aspect regarding characteristics or use of the information presented in DEEDI materials. The user accepts sole responsibility and risk associated with the use and results of DEEDI materials, irrespective of the purpose to which such use or results are applied. Users should seek their own independent advice about the matters contained in this publication. In no event shall DEEDI be liable for any special, indirect or consequential damages or any damages whatsoever resulting from loss of use, data or profits, whether in an action of contract, negligence or tort, rising out of or in connection with the use or performance of DEEDI materials.
Breedcow and Dynama Software: Software Licence
Grant of licence
The State of Queensland through the Department of Employment, Economic Development and Innovation (DEEDI) hereby grants you a non-exclusive and non-transferable licence to use the Breedcow and Dynama software (Software) on the following terms and conditions.
Use of the Software
- DEEDI grants you the right to use one copy of the Software.
- You must not, and must not authorise others to:
- use the Software for unlawful purposes, misuse the Software, or use the Software with the intention of encroaching upon the privacy of an individual or company or other organisation;
- engineer, decompile, disassemble or create derivative versions from the Software; or
- sell, rent, lease, exchange, give away or otherwise dispose of the Software.
- Each copy of the Software must contain all of the original proprietary notices, disclaimers and licence.
- The Software is subject to copyright. Without excluding or limiting the application of the Copyright Act 1968(Cth), you are not permitted to copy in whole or part, the Software except for backup purposes and to load the Software into the computer as part of executing the Software. All other reproductions or copies of the Software are in violation of this licence and the Copyright Act 1968.
- You must not without written permission:
- use the name of DEEDI or any trademark or logo of DEEDI; or
- claim any sponsorship, endorsement, approval, affiliation or other association with DEEDI.
- This licence is effective until terminated.
- Termination occurs immediately:
- if all copies of the Software in your possession are destroyed; or
- if you fail to adhere to the conditions of this licence or the provisions of the CopyrightAct1968.
- Upon termination, you must ensure that all copies of the Software are immediately destroyed or returned to DEEDI.
- You accept sole responsibility and risk associated with the use and results of the Software.
- You are responsible for determining that the Software is suitable for your own use or purpose.
- DEEDI makes no representations or warranties in relation to the Software, and, you agree that, to the extent permitted by law, all warranties concerning the Software are excluded, including as to:
- the accuracy, completeness, currency or suitability for your purpose of the Software or information in the Software or that reasonable care has been taken in its preparation;
- the non-infringement of third party rights; and
- the absence of errors, defects, viruses or other contaminating or destructive properties in the Software or data.
- To the extent permitted by law, all liability of DEEDI for any loss, damage or costs (including consequential damage) incurred in any way (including but not limited to that arising from negligence) in connection with any use of or reliance on the Software is excluded or limited. Where any statute implies into this licence a condition or warranty, DEEDI's liability for any breach of such condition or warranty is limited to the purchase price of the Software.
- You agree to indemnify DEEDI and its officers and employees against any loss, cost, expense, damage and liability of any kind (including consequential damage and liability in negligence) arising directly or indirectly from or related to any claim in connection with your use of the Software or any product made from your use of the Software. Your liability to indemnify DEEDI will be reduced proportionally to the extent that any negligent act or omission or breach of this licence by DEEDI caused the loss or liability.
- Any variation to this licence must be in writing signed by both parties.
- Any term which is held to be illegal, invalid or unenforceable will be severable and will not affect or impair the legality, validity or enforceability of the remaining terms.
- This licence is governed by the laws of the State of Queensland, Australia.
- In this licence:
- headings are for convenience only and do not affect interpretation; and
- unless expressly stated otherwise, "includes" in any form is not a word of limitation.
Copyright
© 2010 The State of Queensland, Department of Employment, Economic Development and Innovation
Use of names
Term
Use at your own risk
Liability and indemnity
General
Instructions
Install the data files
- If you do not already have Breedcow and Dynama software installed, go back and download Breedcow and Dynama, then come back
- Read the disclaimer and click on the "I agree..." box
- Click on CRCV2.exe
- Do you want to run or save the file - click Run
- Publisher could not be verified... - click Run
- A dialog box will pop up offering to unzip to the 'c:\ folder' on your computer - click Unzip
- Message comes up "92 files unzipped successfully" - click OK, then click OK to close the dialog box
- A new shortcut "Beef CRC Templates Documents and Spreadsheets" will appear under "Breedcow and Dynama V5.05" desktop shortcut. This will provide access to the supporting documentation.